The Atlas Voyager All Cu, like the standard Voyager uses
OCC for both the going and the return conductors and employs
a PTFE dielectric together with a polyethylene foam and conducting
PVC to provide 100% rejection of radio frequency interference
(RFI). The Voyager is a superior unbalanced design and is
together with the Atlas Navigator and the Compass the first
three interconnects in the range of Atlas super interconnects
for high quality systems. Where the Voyager All Cu (all copper)
differs from the standard unit is in the quality of the RCA
plug. The All Cu RCA plug is made from OCC copper and then
silver plated. That provides the signal with an even better
path that causes fewer deletions, hence more information.
The Voyager tends to give a lively performance. Where the
need is for a high quality revealing interconnect with speed
and immediacy, use the Voyager,
Try matching the Voyager All Cu With the Atlas Ascent 2.0,
Ascent 3.50 or Ichor Bi Wire speaker cables.
Features:
Asymmetrical / unbalanced
Double shielded with conductive PVC plus close lapped 99.9997%
pure OCC copper multi-stranded screen providing 100% coverage
for the avoidance of RFI
Low loss polyethylene primary dielectric
Low loss foamed polyethylene secondary dielectric
Concentric stranded rope-lay 99.9997% pure OCC copper multi-stranded
conductor
8.5mm diameter with a soft PVC jacket
Direct silver plated OCC copper, non-compressing, double screened,
self-cleaning RCA plugs
Colour: Black
